set job_title {Intel - Parallel Plate Heat Sink Model: Sandeep Ahuja}
set job_notes {Parameteric Model of cross flow heat sink.
---------------------------------------------------
Parameters Used in the model.

Bs		inch	Bypass on sides
Bt		mm	Bypass at top
NFIN			Number of fins
base_t		mm	Base thickness
base_k		W/m-K	Base conductivity
fin_k		W/m-K	Fin conductivity
fin_t		inch	fin thickness
halflen		inch	Half of heat sink base length
hs_h		mm	Heat sink height including base
hslen_f		inch	Half of fin length
ihs_thick	mm	IHS thickness
inflow		CFM	CFM at the inlet
k_int		W/m-K	Fin/Base interface conductivity, thick=0.5mm
packsize	mm	half of the package size
pwr		W	die power
socket_h	mm	socket height
socket_l	mm	socket length along the flow
socket_w	mm	socket width
sx		mm	die width
sz		mm	die length along  the flow
hs_half_w	inch	heat sink width
fin_half_w	inch	heat sink width covered by fins
-------------------------------------------------------
Add additional parameters below this line.
-------------------------------------------------------


}
